Single Row Ball Bearings

Contact Now

The different rolling bearing types have specific characteristics due to their design. Depending on the type, they are suitable for widely differing applications. Ball roller bearings are designed such that they fulfil a range of technical and economic requirements to an excellent degree. This new type can be used to achieve optimum designs for new bearing arrangements and to replace existing bearing arrangements. The following overview shows comparable rolling bearing types and describes their suitability for the requirements placed on a bearing. In the application, the information in this TPI as well as in Catalogue HR 1, Rolling Bearings, must be observed. Other seal designs are available by agreement. Lubrication Open bearings can be lubricated with grease or oil. Bearings sealed on both sides are greased for life using a lithium soap grease with a mineral oil base.

Bearing Number Bore Dia Outer DIa Width Size
SKF 6302 JEM Single Row Ball Bearings J7 Insert Bearing Unit SH44M No
SKF BB1-0608 DD Single Row Ball Bearings Black Oxide Coating Double 8 Days 1045 Carbon Steel
SKF 6305 ZJEM Single Row Ball Bearings 7 Days Deep Groove Ball Bea Flange Type Available
SKF 6320 JEM Single Row Ball Bearings [Aluminum Alloy] Alu 20 ~ 40 Deep Groove Ball Bea 56
SKF 6309 NRJEM Single Row Ball Bearings No 24000 Rubber Sealed No
SKF 6315 JEM Single Row Ball Bearings M10 PA205- 14 kN 30.9 mm
SKF 6310 ZJEM Single Row Ball Bearings 0.0 4547359149364 9.58 Hz 5.9 kN
SKF 6318 JEM Single Row Ball Bearings 22.6 mm 49.2 mm M6x1 18.2 kN
SKF 6318 ZJEM Single Row Ball Bearings 45 mm 18.9 kN 30 mm -20 °C
SKF 6302-2RSHC3/W64 Single Row Ball Bearings No ZZ (Double Shield) 54 Double
SKF 6310 NRJEM Single Row Ball Bearings 23 Yes (with retaining 6 Bearings with Housin
SKF 6303 NRJEM Single Row Ball Bearings Flat Radial / Thrust 6700 Single Row
2/11